Riyadh

Scheduling and Control Engineer/Manager, Senior Planning, Saudi Tabreed District Cooling Company, District cooling Project for the King Khalid International Airport, Riyadh

START Date: 
February, 2014

Being projects controls engineer/manager i have below role & responsibilities

 

Planning & control department

—  Developed Planning & control departments, role, policies, standards & formats

—  Define foundation of good project controls

Proposal & tendering

—  Prepare Level2 schedule for submission to client as part  of proposal

—  Review all documents & resources related to planning & scheduling at proposal level

Experience Hours (Planning & Scheduling): 
4350
Experience Hours (Cost Management): 
1850
Experience Hours (Forensic Analysis): 
1100

Lead Planning Engineer, Shanahan Engineering Ltd, PP-12 Power Station, Riyadh, SA

START Date: 
December, 2015
END Date: 
June, 2016

I was Lead planning engineer for Shanahan Engineering working on the short term commissioning programme of block 2 of the 2.2gw CCGT PP-12 power station 140km west of Riyadh, total make up across the plant of 8 Gas Turbines, 8 HRSG’s & 2 Steam Turbine’s.

 

Experience Hours (Planning & Scheduling): 
1400
Experience Hours (Cost Management): 
150
Experience Hours (Forensic Analysis): 
300

Project Control Lead, CH2M, Projects Department Improvement Program (MODON), Riyadh, KSA

START Date: 
April, 2016
END Date: 
June, 2016

CH2M (Projects Department Improvement Program, MODON)

Planning Engineer, Saudi Pan Kingdom - Sapac, Trauma Care Center, King Abullaziz Medical City, Riyadh

START Date: 
May, 2009
END Date: 
June, 2010

 

     * From 23-05-2009 till 22 – 06 - 2011 I am working in “SAUDI PAN KINGDOM – SAPAC –“

  On Planning DPT as Planning Engineer.

From 23-05-2009 till 27-06-2010:-

Planning Engineer, Saudi Pan Kingdom - Sapac, Trauma Care Center, King Abullaziz Medical City, Riyadh

START Date: 
May, 2009
END Date: 
June, 2010

 

     * From 23-05-2009 till 22 – 06 - 2011 I am working in “SAUDI PAN KINGDOM – SAPAC –“

  On Planning DPT as Planning Engineer.

From 23-05-2009 till 27-06-2010:-

PROJECT ENGINEER/PLANNING ASSISTANCE, Spring’s Breezes Est. in Saudi Arabia-Riyadh, NAYARA CELEBRATION HALL PROJECT, RIYADH, COMMERCIAL BUILDINGS PROJECT – AL GURABI, RIYADH

START Date: 
January, 1997
END Date: 
July, 2000
  • Worked as a Site supervision of on going projects in Building construction, i.e., (excavation work, instillation of perforated pipe and sewer pipe lines inside Basement, all water proofing works at roof & wet area & finishing works)
  • Preparing of shop drawings and materials submittal and quality checks on incoming material, conducting quality field tests on all incoming materials like cement, steel, sand, aggregates and bricks, conducting mix design concrete on site, casting concrete samples cubes for testing, conducting slump cone tests
  • Study drawings and

Sr. Planning Engineer, Dar al Riyadh consultant, King Abdullah Financial District, Riyadh, KSA

START Date: 
May, 2009
  • Baseline ScheduleAnalysis / Control to ensure proper Scope/ Integration/ TimeManagement of the project in relation to the contract documents.
  • Progress Monitoring, Updating Schedules, Computing Variance and suggesting remedial actions.
  • Generation / Updating of Progress S-Curves.
  • Tracking status of Submittals and Approvals for Drawings, Materials & Sub-Contractors.
  • Preparation of Progress Report (Weekly & Monthly)
  • Correspondence to client, consultants & contractors relevant to schedule in accordance with Specific /

Project Planner, Ahmad Zaki Resources Berhad, Development of Al Faisal University, Riyadh, Saudi Arabia

START Date: 
April, 2004
END Date: 
December, 2006

Involved in all aspect of “Planning & Control” for Building Project within the Organization. Wok scope compises but not limited to item below:

Market Place

Primavera P6 and Microsoft Project books, on-line video training courses and training material available from an internationally recognised publisher and PMI accredited REP. Teach yourself using on-line or book based learning or run your own in-house or public PMI accredited courses.
See how the TIME - LOCATION - VIEW brings clearness to your work programmes
For 25+ years, APMX has been providing competency based project management training to Fortune 500 companies around the world, applying the principles of project based learning, designed to produce measurable results, generating a favorable “return on training investment”.
Syndicate content