South Africa (AF.ZA)

Cost & Estiamting), Project Controls Lead (Planning, Fluor Pty, South African Refinery

START Date: 
October, 2017

Responsible for managing Project Controls Department. Project Control Lead for SAPREF (South African Refinery Joint Venture between Shell & BP. Fluor Contract with SAPREF is to provide Long Term Technical Services Agreement.  Scope of work and Services is to provide Engineering Consultancy for all phase of FEL (BOD,BDP, BDEP, EPCm) services. Manage CAPEX/REVEX budget, from Conceptual Phase up to Construction Management from Pre-Shutdown and Shutdown execution. Manage Project Controls team in on site and interface with SAPREF counterpart on a daily basis.

Experience Hours (Planning & Scheduling): 
800
Experience Hours (Cost Management): 
800
Experience Hours (Forensic Analysis): 
100

Aristotle Ricardo

First Name: 
Aristotle
Last Name: 
Ricardo

Over 25 years of progressive responsible experience in Conceptual, Pre-FEED, FEED (Front End Engineering & Design), EPC (Engineering Procurement and Construction), EPCm, Maintenance and Project Management Consultancy Services. 18 years experience in the management and control of large scale industrial projects in the Oil and Gas Industry.

Professional Since: 
May-1987 (32.6 yrs experience)
Oldest experience: 
Jan 1987 (32.9 yrs experience, WARNING: 0.3 years variance with Professional Since)
Years Experience: 
31
Guild Accreditation: 
GPC Member

LV & MV Switchgear, Senior Project Planner & Project Controls Specialist - Electrical, Transformers, Eskom Holding, Kusile Power Station

START Date: 
October, 2017

Kusile Power Station, which is expected to become the world's largest coal-fired power plant is the first South African power facility to incorporate wet flue gas desulphurisation (FGD) technology generating 6 Units x 800MW of power once fully operational.

 

KPI's

1.     Ensure Main Contractors Baseline Schedule Development meets Employers Requirements and Schedule Integrity meets GAO-16-89G Scheduling Assessment Guide

Experience Hours (Planning & Scheduling): 
2000
Experience Hours (Cost Management): 
500
Experience Hours (Forensic Analysis): 
300

Project Planner and Project Manager, Isomech, Various Industrial Projects

START Date: 
August, 2004
END Date: 
November, 2011

Project Planner / Project Manager

General Function

 

Experience Hours (Planning & Scheduling): 
10000
Experience Hours (Cost Management): 
5000
Experience Hours (Forensic Analysis): 
350

Senior Planner, SNC Lavalin, RBM Tailing Treatment Plant ; Kamoto Roaster Upgrade

START Date: 
November, 2011
END Date: 
October, 2012

Kamoto Scope – Brownfield

 

Experience Hours (Planning & Scheduling): 
1800
Experience Hours (Cost Management): 
750

Outage Site Planner, Worley Parsons, Tutuka Power Station

START Date: 
December, 2012
END Date: 
March, 2013

Primary Objective

 

Experience Hours (Planning & Scheduling): 
800

Senior Planner, Mott MacDonald, Nacala Corridor Project

START Date: 
March, 2013
END Date: 
December, 2013

Nacala Scope - Greenfield

The design of a 1200km rail line connecting coal mines in Tete with the port of Nacala in Mozambique.

Involving route selection, engineering, specification and cost consultancy, the reference design work builds on our role during the initial stages of project development providing logistical and economic studies.

By fine-tuning alignment of the railway, we’ve eliminated the need for tunnelling and reduced the number of bridges and viaducts, cutting cost and enabling faster construction.

Experience Hours (Planning & Scheduling): 
1700
Experience Hours (Cost Management): 
500

Programme Engineer, Arcuss Gibb, Ingula Pumped Storage Scheme

START Date: 
December, 2013
END Date: 
September, 2014

The Ingula Pumped Storage Scheme consists of an upper reservoir, a lower reservoir, an underground power house complex with access tunnels and associated waterways that link the two reservoirs and ancillary works that include buildings, roads, transmission lines and temporary and permanent infrastructure.

Experience Hours (Planning & Scheduling): 
1700
Experience Hours (Cost Management): 
850
Experience Hours (Forensic Analysis): 
500

Frank Lubbee

First Name: 
Frank
Last Name: 
Lubbee

During my entry years to the workplace in the early 70's, I trained as a boilermaker and went on to concentrate on a B/Tech diploma. My areas of focus were Applied Thermodynamics, Cardkey Light and Strengths of Materials.

Professional Since: 
Dec-1975 (44.0 yrs experience)
Oldest experience: 
Dec 1990 (29.0 yrs experience, WARNING: 15.0 years variance with Professional Since)
Years Experience: 
27
Guild Accreditation: 
GPC Member

Senior Project Planner, Murray & Roberts, US Embassy in Sandton - South Africa

START Date: 
June, 2007
END Date: 
September, 2007
  • Provide professional Project Planning skills for the Management.
  • Develop, Control, Co-Ordinate & Update the Planning activities between the Main Contractor, Designers, Sub-Contractors and the suppliers working on the Project.
  • Ensures that Project programs and progress reports are accurate and are issued timely in a well-documented manner to ensure proper evaluations and comparisons.
  • Record & Report actual performance and progress and then apply for Progress Payments.
  • Critical path(s) shall be identified clearly and graphically.
  • Ensures th
Experience Hours (Planning & Scheduling): 
1000
Experience Hours (Cost Management): 
500
Experience Hours (Forensic Analysis): 
1000

Market Place

For 25+ years, APMX has been providing competency based project management training to Fortune 500 companies around the world, applying the principles of project based learning, designed to produce measurable results, generating a favorable “return on training investment”.
See how the TIME - LOCATION - VIEW brings clearness to your work programmes
Primavera P6 and Microsoft Project books, on-line video training courses and training material available from an internationally recognised publisher and PMI accredited REP. Teach yourself using on-line or book based learning or run your own in-house or public PMI accredited courses.
Syndicate content