Guild of Project Controls: Compendium | Roles | Assessment | Certifications | Membership

Lead Planning Engineer

Lead Planning Engineer, Foster Wheeler Arabia Ltd, UOU PETRORabigh

START Date: 
August, 2006
END Date: 
February, 2007

Lead Planning Engineer for Foster Wheeler on an EPCm contract. My role involved the integration of 6 (P3) sub-contract schedules into one master schedule and the ongoing co-ordination of the master schedule with the interfaces of 7 other EPC contractors to provide services such as, HV power, steam, fuel, water and chemical pipelines and the construction of the main control room & 8 new Sub-Stations.

Experience Hours (Planning & Scheduling): 
1150

Lead Planning Engineer, Transnet Capital Projects, Port & Railway Upgrade Projects

START Date: 
July, 2007
END Date: 
June, 2013

EPCM Planning of Port & Railway Upgrade Projects (Feasibility to Execution).

Primavera Regional user support for P6 PRM, Web & PM.

Lead Planning Engineer, J&P Avax S.A., Vasilikos Power Station Phase III, Unit4 & Phase IV Units 5&6

START Date: 
March, 2008

Current Role:

 

Lead planning Engineer to the Industrial and Energy works department

Completed a €189.000.000 230 MW combined cycle power plant (CCGT) project in Cyprus (phase III, Unit4) and are in the final commissioning stages of Phase IV, Unit5 (230MW CCGT worth €230m) and working on the newly awarded phase IV Unit6 (230MW worth €230.000.000), a 60MW PV park, as well as several tenders in the Power Generation and Oil & Gas sectors

Lead Planning Engineer, Ammico Contracting Co. W.L.L., Multiple Projects

START Date: 
October, 2006

 

Planning & scheduling:

Lead Planning Engineer, SINOPEC, Jubail Royal Commission Road & Bridge Project

START Date: 
June, 2009
END Date: 
December, 2012

)  Currently working on Road/Bridge Project (Contract Value: 201 Million SAR / 1.70 Million Man-hours) with BECHTEL as Consultant and Royal Commission as Client, in Jubail Industrial Area-1.

2)  Worked on Five Bridge / Under Pass Projects for Dammam City (Contract Value 620 Million SAR).

 

RESPONSIBILITIES

 

Lead Planning Engineer, DSRL, Nuclear Decommissioning

START Date: 
August, 2007

Lead Planning Engineer for the Dounreay site on behalf of DSRL.  Ensure compliance in all planning areas to the requirements set by the NDA, critical path analysis, portfolio managemenent and reporting to the client and senior team.  Advise the senior management team on potential savings and way forward.  Run scenarios on funding proposals.  Intelligent customer for the planning software, Primavera.  Write and own the guidance for planning on the site and the rules and tools utilised.

Lead Planning Engineer, Wood Group PSN, Chevron, CNRI, CoP

START Date: 
September, 2006
END Date: 
June, 2011

Project Controls ( Planning ) Lead.

Experience Hours (Planning & Scheduling): 
5500
Experience Hours (Cost Management): 
1000
Experience Hours (Forensic Analysis): 
200

Lead Planning Engineer, Arabian Construction Company, Al Mas Tower Project

START Date: 
August, 2005
END Date: 
November, 2008

Lead Planning Engineer reporting to the Project Manager, Planning Manager and Commercial Manager.Responsible for the overall planning input and requirements at construction stage.Integration of all Nominated subcontractors’ programme to the Master programme. Preparation and maintenance of the project as-built programme and close out schedule. Monitors progress of the works against the contractual schedule.Responsible in preparation of daily,weekly and monthly progress reports to client ,consultant and to internal Head Office.

Lead Planning Engineer, Delta Beverages, Construction of Brewery and Bottling Plant

START Date: 
March, 2008
END Date: 
March, 2013
  • Expererience in:
  •  
  • Overseeing the preparation and maintenance of the Project Schedule in P6 and MS Project.
  • Leading the monitoring, reviewing, and analysis of the schedule and status of our Contractors during all phases of the project, including the analysis of any schedule deviations and corrective actions
  • Reviewing contractor P6 schedules provided in Primavera and ensure contractor plans are realistic and achievable
  • Analyzing progress manpower and commodity information to support effective project management
  • Assisting

Market Place

Primavera P6 and Microsoft Project books, on-line video training courses and training material available from an internationally recognised publisher. Teach yourself using on-line or book based learning or run your own in-house or public courses.
Syndicate content