Guild of Project Controls: Compendium | Roles | Assessment | Certifications | Membership

Tips on using this forum..

(1) Explain your problem, don't simply post "This isn't working". What were you doing when you faced the problem? What have you tried to resolve - did you look for a solution using "Search" ? Has it happened just once or several times?

(2) It's also good to get feedback when a solution is found, return to the original post to explain how it was resolved so that more people can also use the results.

productivity rate in Planning Planet (please explain)

No replies
Fri, 2008-02-08 08:08
kier legard
User offline. Last seen 14 years 18 weeks ago. Offline
Joined: 31 Jul 2006
Posts: 96
Groups: None
hi,


Can someone explain the following productivity rate in planning planet


337 Metal KwikStage, 5 Boards with 2m lifts 11.1 11.9 12.5 m run/hr
338 Metal KwikStage, 5 Boards with 3m lifts 9.1 10.0 10.5 m run/hr
339 Metal KwikStage, House Scaffold with 3 lifts 2.8 3.2 3.8 m run/hr
340 Metal Tube and Fittings, 5-6 Boards wide 3.2 3.7 4.6 m run/hr
341 Tube and Fitting Platforms, 50-250m3 10.6 12.5 18.5 m3/hr
342 Tube and Fitting Platforms, 250-1000m3 18.5 22.5 24.5 m3/hr
343 Tube and Fitting Platforms, over 1000m3 24.5 30.0 33.5 m3/hr
can I use this for reference in steel tube scaffolding erection for bridge falsework?

thanks

kier
Top