Site Engineer-( January  2009 – September 2015)

Project Undertaken: Construction of North West Leg Project

Project Description: An all-new 13 Km. Multilane Dual Carriageway with Service Roads complete with Drainage System, Lighting, Traffic Signage, Vital Appurtenances, etc. The Project also includes seven Diamond Interchanges (pre-stress voided slabs) at major road crossings, and Three Long Wadi Bridges with more than 700 – 40 m. Pre-stress Beams (Wadi Hanifah, Wadi Mahadiyah, and Wadi Ubayer) having a combined length of 2 Km.

Worth of Project: 998 Million Saudi Riyals

Consultant: Dar Alhandasah Shair and Partners

 Exit 5, Malham Interchanges,King Abdul

 Azis Interchanges,Riyadh K.S.A.

 Jeddah-Jizan Expressway, Madina Expressway, Jeddah K.S.A.

 Qassim-Madina Interchange, Qassim K.S.A

• Responsible for the direct implementation of the project and see to it that the works are in accordance and conformity with the approved plans and specifications as per International standard;
• Conduct and issue a daily program of intended site activities to foremen;
• Responsible for HSE on site during the execution of daily activities;
• Supervise testing works in the laboratory and in the field e.g. FDT, SPT /Borehole Testing, Strand Testing for relaxation, elongation, Tensile Strength, Compressive cylinder and beam testing and another related test;
• Responsible for the precast yard casting & pre-tensioning of beams, double T-beams, and hollow core slabs.
• To coordinate with other Senior Staffs, CE Inspectors and Resident Engineers;
• Confers with Foremen to provide technical advice and to resolve problems;
• Check and review the daily works of  the staff;
• Supervise in the fabrication of reinforcing steel bars for bored pile, Abutment footing, retaining walls, columns, abutment wall and pier crossheads, masking wall, precast and pre-stressed Girder ,diaphragms, bearing plinth, slab, precast NJB and parapets, Box Culverts with reference in the structural plan together with bar bending schedules to ensure the stability of the structure, conduct checking of the fixed or installed reinforcements as per shown in plan.
• Conduct and supervise the installation of false work and form works as per shown in the plan to ensure the correct alignment, measurement and elevations of the structure as per the approved setting out data;
• Coordinates with the Project Manager regarding the requirement of the project such as manpower, materials and equipment;
• Conduct actual concreting of Bridge Structures e.g. Bored Pile, Pile cap and Footing, Columns, Crossheads, Slope protection and approaches, Box Culverts and Irish crossings, Precast Prestressed Girder, Box Type and with Void former, Bridges Slab, Precast NJB and Parapets ,Stressing of Tendons for Monostrand and Multistrand,and grouting of Post-tensioned tendons;
• Conduct Launching of Girders, Installation of Bridge parapets and New Jersey barriers as per the approved setting out plan;
• Check and review the bar bending schedules, shop drawing, and setting out data prior to the execution.
• Make daily, weekly, monthly accomplishment reportand other relevant issues encountered during construction.
• Make timecard for  all the staff;
• Establish methods to meet work schedule and coordinate work activities with other departments to achieve the date of completion and to avoid conflict of works that may cause delay, respectively.
• Requisition of materials and supplies.  Assist workers to facilitate the request of materials needed for the work.
• Resolve work problems and recommend work measures to improve productivity.
• Ensure standards for safe working conditions are observed.
• Ensure that design and project quality plan are maintained during the construction phase.
• Ensure that design and quality requirements are maintained during construction phase
• Ensure all necessary construction procedures are in place and approved.
• Ensure that all materials delivered and installed are approved as per material requirements.
• To communicate with the design team as per the site situation, accomplishment and etc.
• Participate, if required, to the elaboration of the procedure, and ensure it is well understood by the site team. 
• Conduct checking of setting-out data (elevation, coordinates, alignment) and other relevant details of the structure with the surveyor and consultant.
• Conduct checking of reinforcements of the structure as per stipulated in the approved shop drawings and bar schedules and also alignment, level, dimensions, coordinates of the installed form works with the Consultant Inspector prior to casting.