Project Planning Engineer, USTAY Construction, Polypropylene and High Density Polyethylene Plant Project

USTAY Construction                                                from: 26 December 2016 up to 30 September 2017               

Position:  Project Planning Engineer

Project involved:

• SOCAR PP-U&O and HDPE Projects

Polypropylene and High Density Polyethylene Plant Project.

• Polymerization Area
  • Polymerization Building.
  • Polymerization Piperack.
  • Raw Material Handling.
  • Low Pressure Solvent Recovery.
  • Steam Condensate.
  • Ethylene Treatment.
  • Cooling Water Supply Return.
  • Solvent Branch Piperack.
  • Solvent Recovery Piperack
  • Ethylene Compressor
  • Flair Drum
  • Reactor Dump Tank
  • Powder Conveying Package
  • Nitrogen Purification Package
• Interconnection Piperack Between Extrusion & Polymerization Piperacks.
• Extrusion Area
  • Extrusion Building.
  • Extrusion Piperack.
  • Additive Storage.
  • Tower Crane.
  • Polymer Water Pit.
• Organoleptic Area
  • Organoleptic Building.
  • Organoleptic Treatment
• Blending Silo are
  • Blending Silo Building.
  • Pellet Conveying Package.
  • Blending Silo Piperack.
• Bagging & Packing Silo Area
  • Bagging & Packing Building.
  • Bagging Silo Piperack.
• Fire Water Valve House Area
  • Fire Water Valve House Building.
  • Fire Water Valve House Piperack.
  • UG Lines
• Substation Area
  • Substation Building.
  • Control Room
  • Rack Room
  • Transformer
  • Substation Piperack
• Catalyst Unloading Building
• Catalyst Activator Building
• Cooling Tower

Job Description:

• Management / Construction plans at all levels
• Plan, Report and control work schedule.
• Weekly reporting of the work progress in accordance to the plan package i.e Plan against actual and its variances
• Early warning of foreseeing area of concern to Project manager of any issue causing delay to the project
• Critical path program analysis 
• Weekly, Monthly and periodic 90 days Plan of Construction
• Checking Daily Man Power and preparation of the daily report
• Make a plan in P6 at all levels also in MS Project
• Hard working under pressure with Planning team
• Checking Construction Progress on a site
• Updating schedule P6
• Daily , weekly Photo Progress
• Milestones Plan
• Project Summary Schedules
• Project Detailed Schedule
• Baseline Schedule
• Progress S-Curves
• Updating Layouts
• 90 Day Plan
• Making Progress Payment
• Quantity Surveying.
• Steel Structure progress and making databases.
• Pipe Racks progress calculations.
• Piping prefabrication and erection works (shop weld, field weld, tack weld etc.) progress calculations.
• Spooling works calculations from isometrics.
• Making concrete data bases for actual and for drawing quantities and keeping under control for different of both.
• Preparing equipment’s transporting and installation schedule for purchase.
• Preparing schedule for electrical, earthing and finishing works and given progress.
• Making micro schedule for critical works.
• Calculating Underground works progress by quantities from drawings and given progress.
• Making schedule and progress for Piping prefabrication, fabrication, site assembly and site erection works. Also for support fabrication and erection works.
• Weekly & Monthly Achieved and Against  progress calculation & Preparing 28 days look ahead schedule for below works
  • Civil Works
• Piling, Excavation, Foundation, Backfilling, Cast In Situ R.C. Structure, Building – Masonry, Paving – Concrete, Building – Finishing, Grouting - Steel Structures, Steel Sheets (Roofs / Sidings), Fire Proofing Steel Structure, Clean Agent System Installation, HVAC installation, UG Sys. - Pit/Trench/Pipe/Cable (UG), UG Sys. -Storm Water Drain(UG), UG Sys. - RC/HDPE/PVC/PP Lines (UG), UG Sys. - Earthing System - Strip Laying (UG) Works.

• Steel Structure Works.
• Steel Structure Assembly & Erection, Sec. Steel/Handrails/Ladders/Gratings Works.
  • Piping Works.
• Piping - Sandblasting. & Primer, On Site Erection Piping >=2, On Site Support Erection, On Site Erection Piping <2, On Site Support Fabrication, Tie-Ins Works.
  • Mechanical Works.
• Package Units, Heat Exchangers, ROTARY COMPRESSORS,VESSELS / SILOS, AUXILIARY STEEL STRUCTURE, Other Static Equipment’s, Loop Reactors, Extruder, Package Units-Pneumatic Conveying System - Equipment, Package Units - Pneumatic Conveying System - Pneumatic Haulage Piping, Static - Columns, Other Machinery Works.
  • Electrical Works.
• Field Panels/Local Stations , Heating System, Lighting Systems, Substation Equipment (Common-60, HDPE-106nos.), Cathodic Protection Electrical work(UG), Distribution Transformer
  • Instrumentation Works.
• Branch Cable Tray, Cabinets/J. B/L/P/Shelters, Main Cable Laying, Main Cable - Terminations, Branch Cable Laying & Termination, Instruments - Installation , Instruments - Calibration, Connections
  • Painting & Insulation Works.
• Piping Painting Finishing Coats, Steel Structure & Piping Supports-Finishing Coats, Equipment Painting Finishing Coats, Insulation - Piping, Insulation – Equipment
  • Pre-commissioning
• Pre-commissioning Activities