Filter is not working properly???

Submitted by Chris G. on
Planning, Scheduling & Programming Discussion

Member for

19 years 3 months
Member for 19 years 4 months
Submitted by Chris G. on Tue, 2012-10-23 17:28
Permalink

Thanks for all of your tips guys...

Ciao,

Chris

Member for

15 years 11 months
Member for 15 years 11 months
Submitted by Raymund de Laza on Mon, 2012-10-22 11:50
Permalink

What I understand from Chris requirement is that He want to filter out only Electrical Items from different Facilities in the same Schedule.

01 Main Building:
   01.01 Electrical Works
       01.01.01 Power Sys

02 Generator Building:
   02.01 Electrical Works
        01.01.01 Power Sys

03 Guard House:
  03.01 Electrical Works
      01.01.01 Power Sys

and so on.

 

In doing so... Filter

1. WBS under = 01.01
    WBS under = 02.01
    WBS under = 03.01

2. Create Activty code "Electrical"
    Activity Code = Electrical

 


   

Member for

16 years 7 months
Member for 16 years 7 months
Submitted by Gary Whitehead on Mon, 2012-10-22 09:35
Permalink

Chris,

 

Try Dieter's suggestion. I believe it is the correct solution for you.

 

Cheers,

 

G

Member for

18 years 9 months
Member for 18 years 10 months
Submitted by Dieter Wambach on Mon, 2012-10-22 09:23
Permalink

Hi Chris

The filter under shows you all activities under WBS e.g. "Electrical". That's the way I understood your question

 

Dieter

Member for

19 years 3 months
Member for 19 years 4 months
Submitted by Chris G. on Sun, 2012-10-21 22:09
Permalink

Mike, Yes I was trying to apply for the whole project that consist of several buildings with the same WBS structure.

Dieter, I guess using the "under" will be too much of a parameter since I am trying to filter for multiple buildings.

Raymund, I think I dont have much time to create and code each activities, and at this tender stage.

 

I really dont know whats wrong, even I try to re-type one WBS name to refresh. For now, I am just using a combination of activity names and activity ID's to filter since I create them as typical.

BAFINxxx = Finishing Activites for Building A

BBFINxxx = Finishing Activites for Building B

BAELExxx = Electrical Activities for Building A

BBELExxx = Electrical Activities for Building B

Member for

15 years 11 months
Member for 15 years 11 months
Submitted by Raymund de Laza on Sat, 2012-10-20 18:45
Permalink

Chris,

I suggest to create Activiy Code to make the filtering easier.

Member for

18 years 9 months
Member for 18 years 10 months
Submitted by Dieter Wambach on Sat, 2012-10-20 10:32
Permalink

Hi Chris

use "WBS" then "is under". Then you can select "electrical".

Pay attention for other active filters.

Good luck!

Dieter

Member for

19 years 10 months
Member for 19 years 11 months
Submitted by Mike Testro on Sat, 2012-10-20 08:43
Permalink

Hi Chris

Are you applying the filter to the whole project?

Best regards

Mike Testro