RESUME
YOGESH KUMAR YADAV
(Diploma in Electronics (COMU. / DIGI. )
(B.Tech. in Electronics & Telecommunication)
Mob:-0060 192154761,
Mail Id:-yogesh01574@yahoo.com
Objective: -
To constantly challenge my own limits.
Attributes: -
Objective thinker, ability to produce results under pressures, calm attitude and a hard worker with excellent written and oral communication skills.
Work Experiences: -
1. IRCON INTERNATIONAL Ltd. Malaysia in SGEDT Project.(Feb-2010 to Till Date)
Presently working with IRCON INTERNATIONAL Ltd. (Govt. of India) in the Seremban to Gemas Double Track Project in Malaysia.
Responsibilities included:-
- Controlling all activities included in the weld process, the maintenance and repairing of the flash butt rail welding machine H-1000 CW615, Holland make.
- Servicing and fault finding of machines such as Unimate-08-3S, Duomatic 08-32 and Duomatic-08-32CM.These machines are Plasser and Theurer make. As for the DTS cum BRM is of Plasser & Theurer make and the Ballast Regulator is of Kershaw make
- Providing emergency support to all track machines (Tampers, Stabilizer, Regulator, Slewing and Lifting machines).
- Preventive maintenance for machine (weekly, monthly, schedule maintenance and yearly maintenance).
- Procurement of spares from local market and machine manufacturer like Plasser, Holland LP. , Geismar etc.
- Maintaining records for weld qualification test, weld geometric and ultra sonic test record for 150M welded string.
2.IRCON INTERNATIONAL Ltd. C-4 District Centre Saket NEW DELHI (INDIA) at Flash Butt Welding Plant in DMRC BT-2 Project.(June-2009 to Feb.-2010)
I have worked in Delhi Metro Rail Corporation Project for nine months as a site incharge of flash butt welding machine K920 S.No-58, E.O.paton make.
Responsibilities included:-
- Maintaining the machine and organizing the site according to the situation.
- Arrangement of all equipments which was necessary for Tunnel Welding.
- Inspection of site before unloading the machine in the tunnel for proper panel laying and proper planning for rail feeding and welded string sifting in tunnel.
- Responsible for taking out the machine from the tunnel and properly loading it on the trailer with safety precaution and again unloading the machine at the next tunnel site.
- Responsible for maintaining the records for welds and spares of machine and procurements of spares.
3. RICON Mozambique (JV OF RITES & IRCON) Mozambique (South Africa) Worked as site in charge of Flash Butt Welding Plant. For BEIRA Rail Project.(April-2007 to May-2009)
I worked as a site- in-charge of the Flash Butt Welding machine in Mozambique (South Africa) in the Beira Rail Project from April 2007 to May 2009. I was controlling all activity in welding process, also the maintenance and repairs of welding machine H-1000 CW-616, Holland make. I also performed Servicing and fault finding of Unimat-08-3s, Plasser & Theurer make, Duomatic Metex VPR02 Russian make and track slewing and lifting machine Geismar make. I also maintained all records for rail geometry, weld qualification test and dispatch of panels. I handled the procurements of spares for all track machines, earth moving machines and 25 no’s of gantry hoists and RRV.
Company profile: -
IRCON INTERNATIONAL Ltd. Is an Indian railway construction company that is working at international lavel like Malaysia, Mozambique, sreelanka, India, Bangladesh, Algeria, and South Africa etc.
4. PLASSER INDIA Pvt. Ltd. Faridabad Haryana .(January-2003 to March-2007)
Company Profile:-
Plasser India Pvt. Ltd. is in Faridabad (Haryana) Company makes the Track maintenance machine (TTM- Duomatic-08-32, Unimate-08-3S, DGS-62-N, FRM80, FRM-85, BRM, BCM, CSM, 3X, Unimate4S and Flash Butt Welding machine) which is based on Hydraulic, Pneumatic, Microprocessor and microcontroller based using Electronic cards and relay logic PLC.. It’s a MNC concern, which has Headquarter in LINZ AUSTRIA.
Jobprofile: -
I have worked with this company as a service engineer and my job profile included trouble shooting and repairing of Electrical, Hydraulic, Pneumatic faults at customer site all over India.
Responsibilities included:-
- Repairing Hydraulic, Pneumatic parts which was found faulty at costumer site and also troubleshooting and repairing of PCB’s to be done in company.
- Testing and calibrating of machine in the company.
- Commissioning of machine at Northern Railway Yard and in different railway divisions.
- Responsible for training the operators and giving them necessary instruction for the maintenance and proper operation of the machines.
- Trained the railway machine staff for preventive maintenance.
Educational qualification: -
- Matriculation with first division from secondary Education board of Rajasthan in 1997.
- Senior Secondary with second division from secondary education board of Rajasthan in 1999.
Technical education:-
1. Three years diploma in Electronics (Communication/ DIGI.) from BOARD OF TECHNICAL EDUCATION, RAJASTHAN JODHPUR (INDIA) 2002.
2. Diploma in PLC & SCADA from SOFCON INDIA Pvt. Ltd. Noida (U.P.). 2006
3. B.Tech. in Electronics & Telecommunication. 2010.
Skill/Strength: -
- Leadership and motivational skills.
- Can work under pressure and meet tight deadlines.
- Willingness to learn and grow to contribute to the company.
- Good listening skill and acute in trouble shooting to identify/ solve problems.
- Independent in managing difficult situations.
- Flexibility.
- Ability to achieve the targets.
Personal details:-
Father’s Name - Shri Dharam Bir
Date of Birth - 11Dec.1981
Marital Status - Married
Languages Known - English, Hindi and Portuguese.
Passport Number - F0848742
Passport Valid UP TO - 20-12-2014
Date: - 15/08/2011 (YOGESH KUMAR YADAV)
Place:- Seremban(Malaysia) Track Machine Expert
Ircon International Ltd.