Planning & Programming Training Member for 19 years 10 months Member for 19 years 11 months Submitted by Mike Testro on Thu, 2008-06-26 07:23 Permalink RE: Closing Cavity Walls Hi James Wessex estimating item GJ002 Closing Cavities not exceeding 75mm wide: 102.5 Facing Brickwork: at jambe or end of wall 0.40 lab hours per m at sill 0.55 lab hours per m at top of wall 0.30 lab hours per m As I advised earlier - get the disc from RICS bookshop. Best regards Mike Testro Member for 17 years 4 months Member for 17 years 4 months Submitted by Baris Baris on Wed, 2008-06-25 07:13 Permalink RE: Closing Cavity Walls Even though this is non-technical answer, For trying to help you, i have just found these typical sections about insulation of cavity walls? http://www.plymouthfoam.com/building_products/duraspec/images/cavitygen… http://www.achfoam.com/ACH/media/images/Sheathing/Cavity%20Wall2.jpg Member for 19 years 1 month Member for 19 years 1 month Submitted by Anoon Iimos on Wed, 2008-06-25 06:49 Permalink RE: Closing Cavity Walls i believe the question is not answerable without any details (in an engineers point of view) Log in or register to post comments
Member for 19 years 10 months Member for 19 years 11 months Submitted by Mike Testro on Thu, 2008-06-26 07:23 Permalink RE: Closing Cavity Walls Hi James Wessex estimating item GJ002 Closing Cavities not exceeding 75mm wide: 102.5 Facing Brickwork: at jambe or end of wall 0.40 lab hours per m at sill 0.55 lab hours per m at top of wall 0.30 lab hours per m As I advised earlier - get the disc from RICS bookshop. Best regards Mike Testro
Member for 17 years 4 months Member for 17 years 4 months Submitted by Baris Baris on Wed, 2008-06-25 07:13 Permalink RE: Closing Cavity Walls Even though this is non-technical answer, For trying to help you, i have just found these typical sections about insulation of cavity walls? http://www.plymouthfoam.com/building_products/duraspec/images/cavitygen… http://www.achfoam.com/ACH/media/images/Sheathing/Cavity%20Wall2.jpg
Member for 19 years 1 month Member for 19 years 1 month Submitted by Anoon Iimos on Wed, 2008-06-25 06:49 Permalink RE: Closing Cavity Walls i believe the question is not answerable without any details (in an engineers point of view)
Member for
19 years 10 monthsRE: Closing Cavity Walls
Hi James
Wessex estimating item GJ002 Closing Cavities not exceeding 75mm wide:
102.5 Facing Brickwork:
at jambe or end of wall 0.40 lab hours per m
at sill 0.55 lab hours per m
at top of wall 0.30 lab hours per m
As I advised earlier - get the disc from RICS bookshop.
Best regards
Mike Testro
Member for
17 years 4 monthsRE: Closing Cavity Walls
Even though this is non-technical answer,
For trying to help you, i have just found these typical sections about insulation of cavity walls?
http://www.plymouthfoam.com/building_products/duraspec/images/cavitygen…
http://www.achfoam.com/ACH/media/images/Sheathing/Cavity%20Wall2.jpg
Member for
19 years 1 monthRE: Closing Cavity Walls
i believe the question is not answerable without any details (in an engineers point of view)