Guild of Project Controls: Compendium | Roles | Assessment | Certifications | Membership

Tips on using this forum..

(1) Explain your problem, don't simply post "This isn't working". What were you doing when you faced the problem? What have you tried to resolve - did you look for a solution using "Search" ? Has it happened just once or several times?

(2) It's also good to get feedback when a solution is found, return to the original post to explain how it was resolved so that more people can also use the results.

scaffolding erection rate in pp

No replies
Wed, 2008-04-02 09:08
kier legard
User offline. Last seen 14 years 18 weeks ago. Offline
Joined: 31 Jul 2006
Posts: 96
Groups: None
Hi,
Can someone explain this production rate.Can i use this as reference for scaffolding erection


Ref Task / Description Slow Ave Fast Units
337 Metal KwikStage, 5 Boards with 2m lifts 11.1 11.9 12.5 m run/hr
338 Metal KwikStage, 5 Boards with 3m lifts 9.1 10.0 10.5 m run/hr
339 Metal KwikStage, House Scaffold with 3 lifts 2.8 3.2 3.8 m run/hr
340 Metal Tube and Fittings, 5-6 Boards wide 3.2 3.7 4.6 m run/hr


regards,

kier
Top