Autocad

Planning Engineer, Design Engineer, NCC LTD, 1X470 MW Combined Cycle Power Plant,2X660 MW Super Critical Thermal Power Project

START Date: 
May, 2010

PROFICIENCY FORTE Design Engineering  Review and Approval of Contractor’s Drawings/ Documents.  Pipe size selection, Pump sizing.  Evaluation of Technical offers.  Coordination with Purchase Department & Assist in order placement.  Coordination of Project Activities with Client and Vendors.  Detail Calculation of Ash handling system.

Planning Engineer, Design Engineer, NCC LTD, 1X470 MW Combined Cycle Power Plant,2X660 MW Super Critical Thermal Power Project

START Date: 
May, 2010

PROFICIENCY FORTE Design Engineering  Review and Approval of Contractor’s Drawings/ Documents.  Pipe size selection, Pump sizing.  Evaluation of Technical offers.  Coordination with Purchase Department & Assist in order placement.  Coordination of Project Activities with Client and Vendors.  Detail Calculation of Ash handling system.

Planning Engineer, Design Engineer, NCC LTD, 1X470 MW Combined Cycle Power Plant,2X660 MW Super Critical Thermal Power Project

START Date: 
May, 2010

PROFICIENCY FORTE Design Engineering  Review and Approval of Contractor’s Drawings/ Documents.  Pipe size selection, Pump sizing.  Evaluation of Technical offers.  Coordination with Purchase Department & Assist in order placement.  Coordination of Project Activities with Client and Vendors.  Detail Calculation of Ash handling system.

PROJECT ENGINEER, Trinetra Constructions, 1.Construction of Multistoried Buildings

START Date: 
November, 2001
END Date: 
January, 2011
PROFESSIONAL EXPERIENCE (10 YEARS)         

 

From July 2008 till date

 

ORGANIZATION     :TRINETRA CONSTRUCTIONS, Bangalore.

DESIGNATION         : PROJECT COORDINATOR.

PROJECT                  : CONSTRUCTION OF SERVICE CENTRE FOR INDIA

Design Engineer / Draughtsman, Pentre Engineering, Numerous

START Date: 
January, 1995
END Date: 
May, 1997

Pentre Engineering Design & Manufacture Cable Reels for heavy cables, these reels can typically take tens of tonnes load & be wound to high line tensions.

Employed to design and detail various types of cable reel and associated items using AutoCad V12. The design work involved detailed Stress Analyses on all aspects of a reel from barrel buckling due to wire wedging through to spoke bending due to dead (and dynamic) loading.  I was trained as a Network Supervisor (Novell Netware).

Mechanical Design / Project Engineer, Hunting Engineering, Numerous

START Date: 
March, 1997
END Date: 
September, 1999

Hunting Engineering provide electrical & mechanical design solutions to the Ministry of Defence.

Employed to design mechanical elements for the fitting of communications suites into a broad range of military vehicles (often involving undertaking stress calculations with applicable ‘g’ loadings). The role involved all aspects of mechanical design; initial concept, liaison with customer, concept design, final design (and drawings), writing of installation procedures. I had to undergo a six week vetting procedure to obtain MOD security (SC level) clearance.

PLANNING ENGINEER, Transtel Engineering Pte. Ltd., Various Projects Handled

START Date: 
November, 2009
END Date: 
November, 2010

MAJOR PROJECTS HANDLED: Rhourde Nouss CTH Project (Algeria); Manifa Project (KSA); Jubail Export Refinery (KSA); Green Diesel Project (UAE); Kharir PAGA/Telecommunication Project (Yemen); Karan Offshore & Onshore Project (KSA); Habshan 5 Utilities & Offshore Project (UAE); New Booster Station BS-160 (Kuwait); Sakhalin-1 Project, Arkutun-Dagi Field Dev (Russia);
 

Principal Planning Engineer, AMEC Civil Engineering, A variety of tenders and site based projects

START Date: 
November, 1995
END Date: 
July, 1996

Principal Planning Engineer at AMEC Civil Engineering Ltd [ Edit ]
Civil Engineering industry
November 1995 – July 1996 ( 9 months)

Planner/Scheduler, DOOSAN, Ras Al Khair Power & Desalination Plant

START Date: 
November, 2011

Planner/Scheduler | QS

·         Planning and monitoring master schedules

·         Computes and allocates budget labor units for activities

·         Develops progress reports (daily, weekly and monthly)

Experience Hours (Planning & Scheduling): 
21600

Civil Works & Planning Engineer, Expert System (Pvt)Ltd., Telenor Building Project

START Date: 
November, 2004
END Date: 
January, 2014

Current Role

Education:

                                                B.S. Civil Engineering                (Jan 2001– Dec 2004)

Market Place

Primavera P6 and Microsoft Project books, on-line video training courses and training material available from an internationally recognised publisher and PMI accredited REP. Teach yourself using on-line or book based learning or run your own in-house or public PMI accredited courses.
For 25+ years, APMX has been providing competency based project management training to Fortune 500 companies around the world, applying the principles of project based learning, designed to produce measurable results, generating a favorable “return on training investment”.
See how the TIME - LOCATION - VIEW brings clearness to your work programmes
Syndicate content