Guild of Project Controls: Compendium | Roles | Assessment | Certifications | Membership

Project Planning; Progress Reporting; Primavera P6

Planning Engineer, Ajman, Flowline Mechanical Engineering, UAE., Structural Projects

START Date: 
December, 2013
END Date: 
November, 2014
  • Prepare construction program of works related to Civil /Structural/ID /MEP / Firefighting & Fire alarm/ELV discipline wise detailed man-hours , cash flow, dashboards, s-curves using Primavera P6 & MS Project and ensure that the Project Plan reflects the project scope and is fully resourced and cost loaded in reference to the BOQ and Engineering drawings issued for site construction.
  • Prepare Revised Program for the remaining works and recovery program.
  • Check and Update program of works as required for the project through close out, integrating contractor and prog
Experience Hours (Planning & Scheduling): 
2000

Planning & Project Controls engineer., Laing O' Rourke Australia, APLNG

START Date: 
August, 2013
END Date: 
May, 2015

Planning & Project Controls Engineer. Was responsible for maintaining and periodic updating the program, Labour/resource review/forecast. Quantity unit rate reports. Earned value management systems. PRISM

Experience Hours (Planning & Scheduling): 
2000
Experience Hours (Cost Management): 
1000
Experience Hours (Forensic Analysis): 
500

Project Planning Co-ordinator, Scottish Water, (various projects)

START Date: 
March, 2013

Responsible for the monitoring and updating of a broad portfolio of water/waste water projects througout the country.

3D / 4D Planning Engineer, National Grid UK, Electricity Transmission Substations and OHLs

START Date: 
November, 2010
END Date: 
March, 2017

·         Assured Contractor’s programme after contract awarded based on planning principles, Transmission Procedure 193, mandatory milestones, outages, links, budgeted cost and WBS mapping.

·         Ensured Contractor’s programmes are fit for NEC3 type of contract – Option A –E.

Experience Hours (Planning & Scheduling): 
14000
Experience Hours (Cost Management): 
4000
Experience Hours (Forensic Analysis): 
4000

Assistant Planner & Scheduler, Daelim Industrial Co. Ltd, Petrochemical Plant construction

START Date: 
December, 2012

Position: Schedule Engineer

Duration: 2012 Dec - Present

Employer: Daelim Industrial

Client: Sadara Isocyanates Project (Petrochemical Plant)

Detailed Job description:

• Developing a project schedule that includes the entire project scope of work, client requirements, schedule hierarchy, division of responsibility, schedule review, approval requirements, and distribution.

• Updating and analyzing schedules by using Primavera P6 PPM • Analyzing and developing mitigation plans for schedule & cost impacts

Experience Hours (Planning & Scheduling): 
15000
Experience Hours (Cost Management): 
1000
Experience Hours (Forensic Analysis): 
0

Assistant Planner & Scheduler, Daelim Industrial Co. Ltd, Petrochemical Plant construction

START Date: 
December, 2012

Position: Schedule Engineer

Duration: 2012 Dec - Present

Employer: Daelim Industrial

Client: Sadara Isocyanates Project (Petrochemical Plant)

Detailed Job description:

• Developing a project schedule that includes the entire project scope of work, client requirements, schedule hierarchy, division of responsibility, schedule review, approval requirements, and distribution.

• Updating and analyzing schedules by using Primavera P6 PPM • Analyzing and developing mitigation plans for schedule & cost impacts

Experience Hours (Planning & Scheduling): 
15000
Experience Hours (Cost Management): 
1000
Experience Hours (Forensic Analysis): 
0

Planning and Control Engineer, (Makati Development Corporation), -High Ends Residential/Condominiums Building Project

START Date: 
September, 2014
END Date: 
January, 2016

·         Prepares Project Execution Schedule including resource allocation based on project contractual requirement.

·         Develops well-defined and properly sequenced work activities in close coordination with the PM PIC.

·         Analyzes contract data, establishes well-defined work activities and creates a comprehensive, properly linked CPM schedule.

Experience Hours (Planning & Scheduling): 
3000
Experience Hours (Cost Management): 
3000
Experience Hours (Forensic Analysis): 
1000

PLANNING ENGINEER, Saipem, Construction of new Welding Facility Laboratory

START Date: 
May, 2014
END Date: 
August, 2015

Determining the optimal sequence of operations design to execution. Ensuring that construction projects are completed within the deadlines, the budget, and in compliance with all relevant safety standards and regulations.

Established positive communication between the various interfacing parties and stakeholders to enhance forecasting and mitigation plans production in support of the trials process;

Project Planner, Innovation Stream, Product Development and Design

START Date: 
February, 2010
END Date: 
October, 2010

Successfully planned projects and allocated resources using Primavera (P6) and further monitored the progress
- Researched the implementation of PMIS (Project Management Information System) based on Microsoft Share Point and PRINCE 2
- Projects involved: Software development, Electronics development and design, Product development and design
- Business marketing; introducing the company to other businesses in the region by emails and presentations at weekly business meetings
- Assigned to provide reports to clients and contractors

Experience Hours (Planning & Scheduling): 
1000
Experience Hours (Cost Management): 
1000
Experience Hours (Forensic Analysis): 
0

Market Place

Primavera P6 and Microsoft Project books, on-line video training courses and training material available from an internationally recognised publisher. Teach yourself using on-line or book based learning or run your own in-house or public courses.
Syndicate content